Proxim Wireless - Logo
  •  
  •  
  •  
  • Solutions
  • Products
    • Point-to-Multipoint
    • Point-to-Point
    • Wi-Fi
    • Network Management
    • ServPak
    • Link Calculation Tools
    • Awards & Reviews
    • How to Buy?
  • Technology
    • Proxim SmartConnect™
    • Proxim ClearConnect™
    • WORP®
    • Proxim FastConnect™
  • About
    • Company Overview
    • Made in the USA
    • Board of Directors
    • Management Team
    • Events
    • Careers
    • Contact Us
    • Press Release
    • Investor Information
    • Corporate Governance
    • Financial Information
    • Investor FAQ's
    • Privacy Policy
  • Partners
  •  
  •  
Solutions
  • Smart City
  • Mobility
  • Video Surveillance
  • Backhaul
  • Wireless Broadband / ISP
  • WiFi
Products
  • Point-to-Multipoint
  • Point-to-Point
  • Wi-Fi
  • Network Management
  • Services
  • Link Calculation Tools
  • Awards & Reviews
  • How to Buy?
Technology
  • Proxim SmartConnect™
  • Proxim ClearConnect™
  • WORP®
  • Proxim FastConnect™
About
  • Company Overview
  • Made in the USA
  • Board of Directors
  • Management Team
  • Events
  • Careers
  • Contact Us
  • Press Release
  • Investor Information
  • Corporate Governance
  • Financial Information
  • Investor FAQ's
  • Privacy Policy
Partners
  • English (EN)
  • English (EN-US)
  • Français (FR)
  • Español (ES)
  • 日本語 (JP)
  • 简体中文 (CN)

Home Products Point-to-Point Quickbridge 10250 BeamX Series

Quickbridge® 10250 BeamX Series

  • Overview
  • Specifications
  • Accessories
  • Resources
 
Quickbridge® 10250 BeamX Series
Simplifying Deployment of High Bandwidth Services

Designed for Easy and Cost Effective Installation

The Quickbridge® 10250 BeamX radios speed deployment of point to point networks by eliminating the complicated and time-consuming antenna alignment process. The intelligent beam steering technology first used in our Multi-point Base station, the Multipoint 10250 BSX has been adapted to enable easy and cost-effective installation. Now a rough alignment between endpoints is enough for the unit to take control of the setup, as the Quickbridge® 10250 manages, and maintains the fine tuning for optimum Signal to Noise Ratio.

In urban nLOS conditions, BeamX QB can help find the right reflection angle from a nearby wall or building to facilitate connectivity.

The always-on BeamX intelligence ensures the link remains optimized to take full advantage of the systems high throughput capability.

The BeamX solution combined with the secondary look-ahead scan radio improves performance even in high RF interference environments.

The Quickbridge® 10250 BeamX device supports the following features for applications that include last mile access or video surveillance, both of which need prioritized and continuous high-speed broadband wireless access:

  • Proxim WORP®
    Proxim WORP® - Combines network access control, data scheduling, advanced QoS, and encryption to ensure highly efficient and secure data transmission.
    Read more +
  • Proxim ClearConnect™
    Proxim ClearConnect™, A suite of interference mitigation technologies ensuring robust and reliable communications in high-density wireless deployments.
    Read more +
  • Proxim SmartConnect™
    Proxim SmartConnect™, Delivering exceptional performance in noisy RF locations by combining a beam steering antenna with a secondary look ahead scan radio to seek, manage, and select the best channel..
    Read more +

Fast, Secure and Flexible

  • Point to Point link that delivers up to 866 Mbps data rate and covers distances up to 10 miles (16 km)
  • AES 128 encryption (Upgradeable to AES 256), Radius authentication, and highly-secure remote management via SSL/TLS1.2, SSH, and SNMPv3
  • Service flow based QoS with deep packet inspection (DPI) to ensure critical data arrives with priority
  • Built-in feature-rich network protocols for IPv4 and IPv6 bridging, routing and gateway functionality

Proxim SmartScan™

  • Performing a continuous background analysis of the full RF spectrum and creating channel availability tables to allow an immediate switch to an optimal channel in case of weather radar detection or interference
  • By removing the initial transmission delay, SmartScan makes DFS channel use more efficient
  • It also opens access to the 5.600–5.650 GHz sub-band and enables effective use of up to 355 MHz of DFS spectrum
Proxim SmartScan™

BeamX™ Antenna

  • Smart antenna delivering a 17° beam that electronically steers itself to the remote end point over a 60° sector, to limit interference from nearby RF sources
  • BeamX QB speeds up deployment by removing the antenna alignment phase. Roughly aim at the remote end, and the BeamX technology does the fine-tuning, optimizing SNR
  • In urban nLOS conditions, BeamX QB finds the right reflection on a nearby wall or building to facilitate connectivity
BeamX™ Antenna

Rugged and Reliable

The Quickbridge® 10250 BeamX is Designed for harsh environments, and is fully IP67 rated, and will deliver years of reliable service in conditions that include, high winds, high salt, and high-temperature extremes.

Multi-Language Support

Web Interface available in English, French, Spanish and Chinese

 
DESCRIPTION
QB-10250-LKX-US Tsunami QB 10250 EndPoint, 867 Mbps, MIMO 2x2, BeamX antenna, SmartScan radio | Part Number : 902-00903
QB-10250-LKX-WD Tsunami QB 10250 EndPoint, 867 Mbps, MIMO 2x2, BeamX antenna, SmartScan radio | Part Number : 902-00905
LICENSE UPGRADES
QB-102x0-LKx-AES256-UPG Tsunami® QB 10200 Link, AES 128 to AES 256 license upgrade | Part Number : 997-00051
INTERFACES
WIRED ETHERNET Two auto MDI-X RJ45 10/100/1000Mbps Ethernet (Port #1 with PoE in & Data, Port #2 with PoE out & Data)
WIRELESS PROTOCOL WORP® (Wireless Outdoor Router Protocol)
RADIO & TX SPECS
MIMO 2x2:2 and 0x2:2 (scan radio)
MODULATION OFDM with BPSK, QPSK, QAM16, QAM64, QAM256
FREQUENCY 4.900 – 5.850 GHz (Subject to Country Regulations)
CHANNEL SIZE 80 MHz, 40 MHz and 20 MHz
DATA RATE MCS 0 to 9 with Dynamic Data Rate Selection
TX POWER Up to 28 dBm (dual chain)
TX POWER CONTROL 0 - 27 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit
  80 MHz 40 MHz 20 MHz Scan Radio
TX POWER (dual RF) MCS0: 28 MCS0: 28 MCS0: 29 N/A
MCS9: 21 MCS9: 22 MCS8: 25
RX SENSITIVITY (Per=10%) MCS0: -89 MCS0: -93 MCS0: -94 N/A
MCS9: -68 MCS9: -71 MCS8: -74
UDP THROUGHPUT (RFC 2544) Up to 672 Mbps Up to 324 Mbps Up to 137 Mbps N/A
OTHER Dynamic Channel Selection (DCS) based on interference detection
Dynamic Frequency Selection (DFS) based on radar signature
Automatic Transmit Power Control (ATPC) with EIRP limit support
ANTENNA
MP-10250-BSX
Integrated 2x2 MIMO Beam Steering antenna:
Beam Width 17° spanning over ± 30° sector
Receive Gain 16 dBi (11 dBi before 5.150 GHz)
Transmit Gain 20 dBi (11 dBi before 5.150 GHz )
MANAGEMENT
REMOTE Telnet and SSH, Web GUI and SSL, TFTP, SNMPv3
SNMP SNMP v1-v2c-v3, RFC-1213, RFC-1215, RFC-2790, RFC-2571, RFC-3412, RFC-3414, Private MIB
OTHER Syslog, sFlow™ agent, SNTP and local time, Spectrum analyzer
Multi-Language Support Web Interface available in English, French, Spanish and Chinese
SYNCHRONIZATION
Pass-trough SyncE and Precision Time Protocol (IEEE 1588v2) Ethernet Synchronization
SECURITY
ENCRYPTION AES 128
AUTHENTICATION Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning)
QoS
  Asymmetric Bandwidth Control Asymmetric UL/DL committed and maximum information rate per service flow
Packet Classification Capabilities 802.1p priority, IPTOS, VLAN ID, IP addresses, ports, Ethernet addresses, IP protocol, and EtherType
Scheduling Best Effort, Real Time Polling Services
NETWORK
MODES Bridging (support LACP through external switches), Routing (RIP v2 and IP tunneling)
IP STACK IPv4 and IPv6 simultaneously
GATEWAY FEATURES DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS
VLAN 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging
POWER
  INPUT OUTPUT
36 to 57 VDC via Ethernet port1 (Power over Ethernet) 48 to 57 VDC – 25 Watt on Ethernet port2 (PoE – software controlled)
12 VDC via Access port 12 VDC on Access port
Power should not be provided simultaneously on both ports.  
POWER CONSUMPTION
30 Watt typical, 40 Watt maximum
ENVIRONMENTAL SPECS
TEMPERATURE OPERATING -40º to 60ºC (-40º to 140º Fahrenheit)
STORAGE -50º to 70ºC (-58º to 158º Fahrenheit)
HUMIDITY 100% relative humidity
IP RATING IP67
WIND LOADING 200 km/h (125 mph)
PHYSICAL SPECS
PRODUCT MODELS DIMENSIONS PACKAGED DIMENSIONS UNPACKAGED WEIGHT (PACKAGED) WEIGHT (UNPACKAGED)
MP-10250-BSX 18.46 x 7.05 x 21.57 in (469 x 179 x 548 mm) 14 x 14 x 3.40 in (371 x 371 x 85 mm) 13.67 lbs (6.2 kg) 7.27 lbs (3.3 kg)
SAFETY STANDARDS
IEC 62368-1:2016 & 60950-22:2016
UL 62368-1 2nd edition & 60950-22 2nd edition
CAN/CSA C22.2 No 62368-1:14 & No 60950-22:17
EN 62368-1:2014 + A11:2017 & 60950-22:2017
CERTIFICATIONS
USA: FCC 90Y + 15E (UNII 15.247)
Canada: IC RSS 102 + RSS 111 + RSS 247
Europe: RED EN 301 489-1 + EN 301-489-17 + EN 301 893 + EN 302 502
PACKAGE CONTENTS
  • One Tsunami® QB-10250-LKX with integrated BeamX antenna and scan radio
  • Two power injector and country specific power cord
  • Two Connector weatherproofing kit (Includes all recommended weatherproofing material)
  • Two Wall / Pole mounting kit
  • Two Antenna alignment (RJ11) dongle
  • Two Grounding kit
  • Two Quick Installation Guide
MTBF & WARRANTY
MTBF over 250 000 hours & 2-year warranty with ServPak Extended Support available.
COMCODE Description  
ETH-STP-25-CAP 25m outdoor, RJ45 terminated, UV Rated, STP Shielded CAT5e cable with M25 cable gland PDF US
ETH-STP-50-CAP 50m outdoor, RJ45 terminated, UV Rated, STP Shielded CAT5e cable with M25 cable gland PDF US
ETH-STP-75-CAP 75m outdoor, RJ45 terminated, UV Rated, STP Shielded CAT5e cable with M25 cable gland PDF US
ETH-SURGE-1G SURGE, GIGABIT SURGE PROTECTOR WITH SHIELDED RJ45. PDF A4
ETH-POEINJ60-1G-VI-v2 Gigabit , 60W, passive PoE injector with RJ45, level VI Compliance PDF US
10000-UMK Outdoor Universal Mounting Kit for Tsunami 800/10100 and outdoor ORiNOCO 9100 PDF US
ETH-CAP-M25-20 Cable Feed Thru, M25 Cable Gland Connector for Tsunami 10100 and outdoor ORiNOCO 9100 – 20 pack  
GPS-POSITION-KIT Accessories, Garmin GPS for 10200 Series positioning, RJ45 to RJ12 adaptor and weather proofing.  

Related Resources

  • PDF Quickbridge® 10250 BeamX Data Sheet (US / A4)
    Read, print the complete product specifications
  • At a Glance
    Compare the QB-10250-LKX Series with other Proxim’s PtP products. A quick look
  • Product Gallery
    See the different views
 
  • How to Buy
  • Newsroom
  • Events
  • Training
  • Partners
  • Find a Distributor
Point-to-Multipoint
Wireless Broadband
Point-to-Point
Wireless Backhaul
Wireless LAN Access
Network Management
Link Calculation Tools
Products
Resources
  • Case Studies
  • White Papers
  • Application Notes
  • Calculators
Partners
  • Partner Portal
  • Become a Reseller
  • Find a Distributor
  • Certification Training
Technology
  • Proxim SmartConnect™
  • Proxim ClearConnect™
  • WORP®
  • Proxim FastConnect™
Solutions
Support
  • Warranty Policy
  • ServPak
  • Technical Support Policy
Latest at Proxim
  • Events & Webinars
About Us
Contact Us
Privacy Policy
ISO 9001:2015 Certificates
  • Company Overview
  • Made in the USA
  • Press Release
  • Contact Us
  • Careers
  • Sitemap
  • Privacy Policy
  • ISO 9001:2015 Certificate
Keep in Touch
© 2009 - 2023 Proxim Wireless. All rights reserved.
Reproduction of material from any Proxim pages without written permission is strictly prohibited.
How can we help you
X
 
Cookies have been disabled, and we will not collect personal information, but please note the website may not provide all the options you would have if cookies were enabled.